The BX1-180 Welding Machine (Model 51523) is an electric welding machine designed for metal joining applications that require an adjustable welding current. With a rated welding current range of 60–180A, a rated input capacity of 9.6KVA and a no-load voltage of 48V, this machine is suited to compatible welding tasks in workshops, fabrication environments and maintenance operations.
Whether you are handling metal fabrication, equipment repairs or general workshop projects, selecting a welding machine with suitable electrical specifications is important. The BX1-180 provides a range of technical features that buyers can consider when choosing equipment for their welding requirements.
Adjustable Welding Current: 60–180A
The BX1-180 offers a rated welding current range of 60–180A, allowing the operator to select an appropriate current within the machine’s specified range. Welding current is an important factor in determining the heat delivered during welding and should be matched to the electrode, material thickness and welding procedure.
The adjustable range makes the machine suitable for compatible welding applications requiring different current levels. Correct current selection can help achieve an appropriate weld while reducing the risk of defects such as excessive spatter, poor penetration or burn-through.
Always follow the electrode manufacturer’s recommendations and the welding machine’s operating instructions when selecting settings.
Electrical Performance and Input Capacity
The welding machine has a stated working voltage of 220V–380V and a rated input capacity of 9.6KVA. These specifications are important when planning the electrical installation and ensuring that the available power supply is compatible with the machine.
The listed no-load voltage is 48V. This refers to the voltage at the welding output when the machine is not actively welding. Buyers should confirm the manufacturer’s electrical connection diagram and whether the 220V–380V rating refers to selectable supply configurations or another arrangement before installation.
Because welding equipment draws significant electrical power, it should be connected to a suitable power supply with appropriately rated cables, protection and earthing. A qualified electrician should verify the installation before the machine is used.
Rated Duty Cycle of 10%
The BX1-180 has a specified rated duty cycle of 10%. Duty cycle indicates the proportion of a defined operating period during which a welding machine can weld at a specified output before requiring a cooling period.
A 10% duty cycle means the machine is intended for relatively short welding periods followed by adequate cooling time under the conditions used for the manufacturer’s rating. This is an important consideration for buyers who expect to perform extended or continuous welding work.
For applications involving frequent or prolonged welding, compare duty-cycle specifications carefully and allow the machine to cool as instructed. Avoid exceeding the rated operating limits, as overheating may damage the equipment.
Insulation Class H and IP21S Protection
The welding machine features Class H insulation, a specification relating to the thermal classification of its electrical insulation system. This is relevant to the machine’s internal electrical components and their ability to withstand specified operating temperatures.
Its IP21S protection rating identifies the level of protection provided by the enclosure against access to hazardous parts and the ingress of solid objects and water under defined test conditions. It is not a waterproof rating. The machine should therefore be used in a suitable, dry and protected working environment.
Keeping the equipment clean, properly ventilated and protected from excessive dust and moisture can help support safe operation and maintenance.
Suitable for Workshop and Metal Fabrication Applications
The BX1-180 can be considered for compatible welding work in environments such as:
- Metal fabrication workshops: For suitable metal joining and fabrication tasks.
- Repair and maintenance: For compatible equipment and metalwork repairs.
- General workshop projects: For welding tasks that fall within the machine’s rated current and duty-cycle limits.
- Small fabrication operations: Where the machine’s electrical requirements and operating capacity meet the job specifications.
The correct welding process, electrode type and material compatibility should always be established before use.
Buy the BX1-180 Welding Machine from Overtech in Nairobi, Kenya
If you need a welding machine with an adjustable 60–180A current range, the BX1-180 is an option to consider for compatible workshop and fabrication applications. Its 9.6KVA rated input capacity, 48V no-load voltage and Class H insulation provide important specifications for evaluating its suitability.
Overtech, based in Nairobi, Kenya, offers customers a convenient place to enquire about equipment and products for different applications. Before ordering, confirm product availability, the correct electrical supply configuration and the available delivery arrangements.
When selecting a welding machine, consider the materials you intend to weld, the required current, expected working duration and available electrical supply. Confirming these details before purchase helps ensure that the machine is appropriate for your workshop requirements.
Key Features and Specifications
- Product: BX1-180 Welding Machine
- Model: 51523
- Working voltage: 220V–380V
- No-load voltage: 48V
- Rated input capacity: 9.6KVA
- Rated welding current: 60–180A
- Rated duty cycle: 10%
- Insulation class: H
- IP protection code: IP21S
- Application: Compatible metal welding, fabrication and repair work
- Seller: Overtech, Nairobi, Kenya
Reviews
There are no reviews yet